Reinforced flat grinding wheels for China Direct

Home > Products > Contact us > FAQ's > About Us > Message Board > Tariff Info > Freight > L/C Help > China Links >

Y & M Depresssed Center Reinforced Wheels ( cutting on portable machines )

Grade	Application	Grade	Application
A 30 SF	General purpose cutting wheel for mild steel, low alloy steel, small sections, metal sheets, pipes, profiles, gray pig iron, non ferrous metals.	A 36 NF	Recomended for high alloy and hard steel, stainless.
A 36 SF	Used for thin cut - off wheels on mild and alloy steel, non ferrous metals, small sections, profiles box shapes, metal sheets, where a clean and fast cut is required.	C 30 SF	General purpose cutting for soft and semi - hard stones, concrete asbestos, tiles soft refractories.
C 30 PF	Cutting wheel for hard stone and refractories, ceramic materials.

The thickness of the wheel can be supplied according to the customer's requirements.

Nominal Sizes D X T X H	Max. Operating Speed R.P.M. 80m/sec	Grade A 30 SF with item #	Grade A 36 SF with item #	Grade A 36 NF with item #	Grade C 30 SF with item#	Grade C 30 PF with item#
100 X 2.5 X 16	15.300		A 36 SF1		C 30 S1
115 X 2.5 X 22	13.300		A 36 SF2		C 30 S3
125 X 2.5 X 22	12.200		A 36 SF3		C 30 S5
150 X 2.5 X 22	10.200		A 36 SF4		C 30 S7
180 X 2 X 22	8.500		A 36 SF5
180 X 2.5 X 22	8.500		A 36 SF6	A 36 NF1	C 30 S9
180 X 3.2 X 22	8.500	A 30 SF1			C 30 S10	C 30 SF1
230 X 2 X 22	6.600		A 36 SF7
230 X 2.5 X 22	6.600		A 36 SF8	A 36 NF2	C 30 S11
230 X 3.2 X 22	6.600	A 30 SF2			C 30 S12	C 30 SF2